Product Information:

Coverking`s Universal Car Covers are made up of three specific materials, namely Coverguard, Triguard and Coverbond 4. The Coverguard material is available at lowest price and provides protection in light weather. Spunbond Polypropylene, a specific material that exhibits breathability is used in Coverguard in a single layer and ultraviolet inhibitors have been added to it to provide protection from the sun’s rays.

Universal Car Covers manufactured by using Triguard material protect your car in light and medium weather. Triguard exhibits breathability as well as water resistance and is made of three layers: a single middle layer of Metlblown Polyproplyene surrounded by two outer layers of Spunbond Polypropylene. Triguard Universal Car Covers is also easy for installation and softly caresses a vehicle’s paint finish. Moreover, Triguard Universal Car Covers resist the damaging effects of the sun’s ultraviolet rays.

Universal Car Covers made up of Coverbond 4 protect your car from the damage unleashed by minor nicks, dings and other hazards. Altogether, Coverbond 4 provides a four layered protection to your car and especially useful in severe weather conditions.

Feature Guide:

Universal Car Covers are comparatively less expensive than custom-made car covers.

Coverking`s Universal Car Covers fit with almost all types of cars and can be easily installed.

Installation Guide:

Preparing Your Universal Car Cover For Installation:

For proper and successful installation of your Universal Car Covers, you are required to prepare them for installation first. Preparation of your Universal Car Cover for installation involves a couple of steps. These are, namely:   

Clean your vehicle properly and make it dust free. You are not recommended to cover a dusty vehicle with your Universal Car Cover, as by wrapping your car cover around a dirty vehicle, you are simply rubbing dust particles into your car cover and damaging its finish.

If your vehicle body is wet, make it dry before covering it with your Universal Car Cover. Never, use your Universal Car Cover to cover a wet vehicle.

Universal Car Cover Installation Process:

To install Coverking`s Universal car Covers, they have to be unrolled first. You can place the Universal Car Cover over your vehicle body and then it becomes much easier for you to unroll it slowly and gradually towards the back end position. Now, you need to unfold the sides so that the Universal Car Cover is properly placed over the body of your car.

If your Universal Car Cover is outfitted with mirror pockets, you are required to install the mirror pockets first and thereafter you can move on to cover the front and back ends of your vehicle.

Special Measures To Be Taken During Installation:

There are certain special measures that you need to implement for successful installation of your Universal car Covers. These installation measures are:

Be careful to keep your Universal Car Cover at a distance from your car exhaust tips if they are too hot or sharp edged. You need to ensure that your car cover material never comes in direct contact with the hot/ sharply edged exhaust tips as the Universal Car Cover may melt instantly as soon as it touches the exhaust tips.

If an antenna is positioned over your vehicle, you are required to induce a small opening in your Universal Car Cover for successful installation. To achieve it, first of all, you need to remove the antenna and drape the vehicle with the Universal Car Cover. Now, you need to find out the base part of the antenna and then cut your Universal Car Cover a little at the specific position where the antenna touches the base of your car body. In the next step, install the antenna and remove the Universal Car Cover. Now, just put the Universal Car Cover around the antenna patches.

Universal Car Cover Lock Kit Installation:

If you have bought a lock kit along with the Universal Car Cover to protect the car cover against theft, you need to use it properly.  For successful installation of the lock kit on your Universal Car Cover, simply follow the steps mentioned below:

Universal Car Cover lock kit has a vinyl coated cable that is equipped with a metal piece on one end and a loop on the other end. Now, after covering the vehicle with the Universal Car Cover, move on to the passenger’s corner and fix the loop end of the cable at a position of around 2 inches through the grommet.

Now, you need to insert the metal piece end under the grommet via the loop of the first end, and under the vehicle to the driver’s corner. Once you reach the driver’s corner, push the cable from outside the cover and then pass it for around 2 inches through the grommet. After passing the cable for around 2 inches, you can simply lock the end pieces to the cable body.

Cleaning Instruction:

Universal Car Covers can be washed properly by using the hand washing procedure, by opting for machine cleaning and also by bringing the inside of the Universal Car Cover out on the vehicle and cleansing it thoroughly.  This particular procedure of bringing the internal Universal Car Cover out on the vehicle and cleansing it thoroughly is applicable only when no external antenna is fixed on your car.

To clean your Universal Car Cover properly via machine cleaning, you need a non-toxic, non-caustic, bio-degradable and eco-friendly anionic laundry detergent and altogether this cleaning process is to be undertaken at 20-27 degree centigrade. However, for machine cleaning, you are recommended to use large automatic speed control washers that are available in almost all the commercial laundries. You are also instructed not to use agitators in the machine cleaning procedure as the use of agitators is likely to tear off your Universal Car Cover completely.

The Universal Car Cover Cleaning Process:

In the first cleaning step, blend two cupfuls of  non-caustic, non-toxic, eco-friendly and bio-degradable liquid anionic laundry detergent with warm/cold water and soak the Universal Car Cover on this mixture for a period of 5 minutes to release the dirt particles.

Clean the Universal Car Cover with gentle cycles for a period of 5 minutes and thereafter rinse with 2 cycles with cold water and then again rinse it one cycle to make the Universal Car Cover half dry.

Now, clean the vehicle thoroughly and then put the half-dried Universal Car Cover around it and then wait for some moments for the Universal Car Cover to be dried thoroughly by the affect of air.

Now, after drying your Universal Car Cover completely, fold it properly and store in the box.  

In this Universal Car Cover cleaning process, you are instructed not to use automatic dryer and also not to dry clean your Universal Car Cover. As you undertake the cleaning procedure effectively, it would adequately protect the finishing treatment on your Universal Car Cover fabric.