Installation Guide:
Your Poly Carpet Dashboard Cover needs to be installed properly for superb safety and protection to your vehicle dashboard. However, for successful installation, you need to prepare your Poly Carpet Dashboard Cover for installation first. The process of preparing your Poly Carpet Dashboard Cover for successful installation is described below:
Preparing Your Poly Carpet Dashboard Cover For Installation:
1. In the very first step, unroll your Poly Carpet Dashboard Cover and position it on the dashboard of your vehicle. Let the Poly Carpet Dashboard Cover placed over your vehicle dashboard for a couple of hours and with the Poly Carpet Dashboard Cover positioned over your vehicle, exposure to direct sunlight would sufficiently relax the fabric finish of your dashboard cover.
2. As your Poly Carpet Dashboard Cover is relaxed properly, remove it from your vehicle dashboard and cleanse the factory dash before moving ahead to cover the dashboard with your Poly Carpet Dashboard Cover.
Installing Your Poly Carpet Dashboard Cover:
Installation of your Poly Carpet Dashboard Cover is definitely easier if you adopt the comprehensive installation guidelines dictated below:
1. Cover the vehicle dashboard with your Poly Carpet Dashboard Cover and then stretch the dashboard cover towards the windshield base to the furthest possible extent. You can use a ruler for the purpose of pushing the dashboard cover as far as it is possible for you.
2. Now, as soon as your Poly Carpet Dashboard Cover is relaxed completely, depending on the temperature and the amount of sunlight to which your dashboard cover is exposed, it would perfectly fit with the shape of your vehicle dashboard within one to two days.
3. As you drive your vehicle with the Poly Carpet Dashboard Cover positioned over the vehicle dashboard in a proper manner, you will get to known if Velcro strips are really essential to keep the Poly Carpet Dashboard Cover fixed over your vehicle dashboard.
Installing Your Poly Carpet Dashboard Cover By Using Velcro Strips:
1. Your Poly Carpet Dashboard Cover is equipped with a loop section of the Velcro already sewn into the edging point and also, your new Poly Carpet Dashboard Cover comes with a strip of the Velcro hook section (the rougher part) alongside an alcohol pad. In the very first step, you need to test the alcohol wipe on a small portion of the factory dashboard that is not visible to the eye clearly in order to ascertain that the alcohol wipe will not induce effects on the color of the factory dashboard.
2. Secondly, drape the Poly Carpet Dashboard Cover around the dashboard of your vehicle and then utilize the alcohol wipe for the purpose of cleansing under every pre-sewn Velcro pieces.
3. In this step, you are required to fix a Velcro tab to a matching Velcro tab sewn into the cover at one time and thereafter remove the backing tape and press the Poly Carpet Dashboard Cover on its proper position.
4. Now, you need to apply pressure for a few seconds and as the pressure is applied, just fix the Velcro on the original factory dashboard.